Gemstone Wyvern
Hi Cinders!
This was a NOVEMBER Design and has been Archived! If you were subscribed in November you will receive an email from MyMiniFactory within the week to access the archived files from that month. If you are starting your Subscription in DECEMBER 2024, Welcome! Your exclusive models are available immediately in the Exclusive posts (link below) and the DECEMBER Models will be in the DECEMBER 2024 posts tab as they come out over the month! https://www.patreon.com/cinderwing3d?filters[tag]=Exclusives
If you missed this model or any others they are available on MMF for purchase! You can get the most up to date discount code on the Welcome and Info post!
https://www.myminifactory.com/users/Cinderwing3D?show=store
-----------------------------------------------------
This is the last release of November! I hope you all had a fun month with these 7 releases!! Please check the list in this post to make sure that you got them all!
Bringing you all the GEMSTONE WYVERN! This was a popular ask after the launch of the new wyvern body and with Gemstone dragon being so popular!
Just like the first Pumpkin Wyvern, this is entirely PRINT-IN -PLACE! These wings print ready to go and also have the fun feature of fanning out and locking into place! There is also a wingbar so you can't overextend the wing!
Thank you Admin Jazzy for this .3MF Color File for multi-color prints!!
Thank you all so much for you support! I hope you and your family have a great Holiday week! See you in December for more fun designs! :)
- Tracy
----------------------------------------------------
FILAMENT:
https://www.amazon.com/shop/cinderwing3d
Pink: Cookiecad Sunset Elixer, Sunlu White
Blue: Cookiecad Witchcraft, Ziro Pastel Pearl
Single color: Ziro Metal Blossom
-----------------------------------------------------
All my designs are print-in-place (unless otherwise specified) and require no supports. All you need is a clean bed and you're off!
Designs are tested between 60%-100% for strength and articulation! I will not release a design that is too fragile at these sizes. All designs go through our Cinder Test Team!
Print Settings: .2 Layer height, 15% infill, gyroid infill, no brim, and no supports. (If there are smaller parts of your print that have a hard time staying stuck to the plate, please try a brim around those parts) Any errors regarding floating regions can be safely ignored.
Please join our discord chat below for more help and discussions.
------------------------------------------------------
NOVEMBER 2024 Models: HERE
Tiny Turkey - RELEASED
3 Pack Tiny Spiders - EXCLUSIVE - RELEASED
Bow Spider
Santa Spider
Snowflake Spider
"Santaurtle" Santa Turtle - RELEASED
Baby Storm Dragon - EXCLUSIVE - RELEASED
Festive T-rex's - EXCLUSIVE - RELEASED
Dinodeer
Santasaurus
Tiny Reindeer - RELEASED
Gemstone Wyvern - RELEASED
-------------------------------------------------------
PLEASE READ
Please remember, NO sharing, re-selling, or distributing this digital file or modifications of it in any way. Also, you are not authorized to use Cinderwing3D photos or anyone else's photos without their permission.
Please see WELCOME POST for questions, all exclusive releases, and links: https://www.patreon.com/posts/welcome-to-info-71819754
All Supporter Exclusives: https://www.patreon.com/cinderwing3d/collections
Discord is our MAIN form of communication and way to provide help! Please join our community below: Discord chat HERE: https://discord.gg/cinderwing3d
For any help requests or issues please go through this email: Email (contactcinderwing3d@gmail.com) OR through a Discord ticket!
Thank you, Cinders, for your support!!! And Thank you to our Admin Jazzy and Test Team for all your hard work!
Comments (25)
you buy them
Y'all really had this up for only a few days? Been a subscriber off and on for a while. That's pretty lame.
Being that I archive everything to MMF, the number of days up doesn't matter as anyone subscribed retains access to the files via the MMF archives :)
Missed this one, how do I access the file?
I keep forgetting to download these before the month changes omggggg.
And it would have been awesome if the wings hadn't detached toward the end. 🤦♀️ This isn't the first Winged model that came detached on me. Any suggestions for preventing this other than adding a brim?
A clean bed and tuning your overhangs also helps :) But brims are usually the way to go
Where's the file? I'm probably looking right over it
This file has been archived! If you were subscribed in November, please check your MMF for the files
Thank you for continuing to share your talent with us. I love your designs. I have already printed several of the reindeer (including Rudolph)! Just started the print on this one.
anyone mind sharing their setting for the gem stone having a lot of issues with warping of the links that causes the hot end to pry them off plate eventually
how do you guys get the wings to hold a pose? everything we do to make them hold they will not stay up.
They lock in place once you push them up and a little back, you can see the cup there the joint is held, just follow that!
Would you ever consider re-vamping the spike dragon as a wyvern?
Love it 😀
I am going to print it I love the look but had bad luck with getting that style wings to stay in place
A clean level bed and brims can do wonders!
Thank you!
This is superb! I was just asked if there was something like this. Thank you for everything.
Amazing
Absolutely awesome
Eeeeee!!!!
You took my favorite dragon and finally made it with wings!! I love it!!!
My thoughts exactly
Now these are cool!!