Dragon-O-Lantern & Pumpkin!
This was an October Design and has been Archived! If you were subscribed in OCTOBER you will receive an email from MyMiniFactory within the week to access the archived files from that month. If you are starting your Subscription in NOVEMBER 2024, Welcome! Your exclusive models are available immediately in the Exclusive posts (link below) and the NOVEMBER Models will be in the NOVEMBER 2024 posts tab as they come out over the month! https://www.patreon.com/cinderwing3d?filters[tag]=Exclusives
If you missed this model or any others they are available on MMF for purchase! You can get the most up to date discount code on the Welcome and Info post!
https://www.myminifactory.com/users/Cinderwing3D?show=store
-----------------------------------------------------
Hi Cinders!
I have something new for you all!
I thought it would be fun to make a Pumpkin Container to go with all the pumpkin creations I was making! This was a fast bonus design that I thought you all might like. Of course I couldn't stop there and decided to put a dragon face on it! I hand-drew this dragon face specifically to have no overhangs, made it 3D in photoshop, and carved it into my pumpkin!
Introducing my Dragon-O-Lantern!
I wanted to give you a bunch of options with this design so I have made several variations shown/listed out in the attached pictures.
The "Impression" label variations are just a recessed carve and when paired with translucent filament can glow through the face. (please see release pictures for reference)
The "Carved" designs are complete cuts through the pumpkin.
The big pumpkins have been tested to print well between 60 and 200%, while the smaller/solid pumpkins have been pre-shrunk to be a good keychain size and were only tested at that size.
Thank you all for supporting me this month! More to come! :)
- Tracy
----------------------------------------------------
FILAMENT:
https://www.amazon.com/shop/cinderwing3d
Glowing Green and Purple: Filamentium Crystal Clear Lime Green, Amolen blue red purple
Red/orange: iSanmate red/orange
Translucent orange: iSanmate Rapid Clear Orange OR iSanmate Transparent Glitter Orange
Rainbow pumpkin: Ziro Candy
-----------------------------------------------------
All my designs are print-in-place and require no supports. All you need is a clean bed and you're off!
Designs are tested between 60%-100% for strength and articulation! I will not release a design that is too fragile at these sizes. All designs go through our Cinder Test Team!
Print Settings: .2 Layer height, 15% infill, gyroid infill, no brim, and no supports. (If there are smaller parts of your print that have a hard time staying stuck to the plate, please try a brim around those parts) Any errors regarding floating regions can be safely ignored.
Please join our discord chat below for more help and discussions.
------------------------------------------------------
OCTOBER 2024 Models: HERE
Hollow Bat - EXCLUSIVE - RELEASED
Tiny Wolf - RELEASED
BABY Pumpkin Wyvern - EXCLUSIVE - RELEASED
Dragon-O-Lantern - RELEASED
7 Variations!
Secret Design
-------------------------------------------------------
PLEASE READ
Please remember, NO sharing, re-selling, or distributing this digital file or modifications of it in any way. Also, you are not authorized to use Cinderwing3D photos or anyone else's photos without their permission.
Please see WELCOME POST for questions, all exclusive releases, and links: https://www.patreon.com/posts/welcome-to-info-71819754
All Supporter Exclusives: https://www.patreon.com/cinderwing3d/collections
Discord is our MAIN form of communication and way to provide help! Please join our community below: Discord chat HERE: https://discord.gg/cinderwing3d
For any help requests or issues please go through this email: Email (contactcinderwing3d@gmail.com) OR through a Discord ticket!
Thank you, Cinders, for your support!!! And Thank you to our Admin Jazzy and Test Team for all your hard work!
Comments (30)
Hallo, Ich hätte eine Frage. Jedes mal wenn ich die zip Dateien runter lade kommt eine PDF Datei dabei raus, warum und wieso? Kann mir das wer erklären?
A PDF? I have no idea, I don't include PDFs in my files. It might be something with how your machine assigns programs to files?
Printing this one as we speak. Funny enough, I actually had a spool of 3DHOJOR Crystal Rainbow Nebulae on hand prior to this release and my drag-o-latern is coming out VERY similar to the one in the post, which I really wasn't expecting lol. The filament I'm using is slightly translucent though, so I pondered on how I might make the walls thinner to allow some light to come through, but I am NOWHERE near experienced enough for that lol. Either way, I absolutely adore these!
Very cool pumpkin! We plan to print these off for our table center pieces for our Halloween Party this year. I went to print this off and was going to print the stem in brown but realized that would not work. We are wondering if you could make make the lid two separate pieces so I can print the stem in brown and then just glue it on to the lid. Thank you for your great work!
I can't find the link for this new pumpkin one's file. Am I missing something? I've searched all over...
make sure that you open the post fully, the STLs are attached to the post :)
I made the candy holder dragon jack-o’-lantern but wanted it big so only printed the bottom. Is there a way I can get the stl for only the lid? I see them as sets or bottom only
the lids only are included already!
Cute!!! Fingers crossed for a Turtle next!!
I already have a Pumpkin Turtle :) The Bumpkinturtle variant is actually free for you as a member!
Could we get a version of the lid where the stem prints separate? Be good for anyone without AMS - but also, I'd love to print in transparent PETG and printing multi-color with PETG just doesn't go well, because of the cooling.
Love it maybe I can make a few before my show tomorrow
Downloaded, and sent to print, can't wait. Every one of your designs is just breathtaking!!!
just finished one of the carved dragon ones! Looks so good!
These are freaking perfect for Halloween. What size are the magnets for 100% size containers?
Btw ive got 1 printing as we speak. Going to have to order some battery tea lights for them
Very cool! Do the lids snap on tight like the eggs or do they just set on top loosely?
It's got a little nub!
so excited for this one.
Oh WOW! I’m SO excited!!!! Thank you!!!
How perfect!!
Awesome 👌
SQUEEEAAKKKK Im in love. Must print them all! lol <3
This is what I have been needing in my life omg I cant wait to make so many of these <3
Thank you all! :)
Omg love it!!!
You are on fire this month. Thank you you're amazing!!
These are so fun!!
These are amazing! 😍
Love these