How to Print and Assembly 3D Prints - SONYA / MK
YOUTUBE (sanix3d), I posted a new video for the project to be posted now in November 2023!
How to Print and Assembly 3D Prints - SONYA / MORTAL KOMBAT (YouTube)
Comments (5)
Thanks for your quick answer. Are you usually using light, medium or big support config from chitubox ? I'm cleaning as well after remving supports on my side (maybe my support position sklills is not yet as good as yours :D)
Thanks for this :) always helpful. ANy recommendation on the support settings you are using in terms of size etc ? I see in all your videos perfect fits and no trace, which makes me dream :D
I apply the support manually to each project Then I test each project, and if everything is fine, only then do I offer the final product to subscribers (including the support files). The model is polished very little. I sanded the bottom at the base, because that's where the thickest support is applied, and because of it, there are more pronounced marks, and the design of the wood that is next to the dragon paw, which I also showed in the video how I sand it. Otherwise, the model was assembled easily and without free spaces, only after removing the support (without sanding). The settings are standard from chitubox (the free version), both for the resin and for the printer, in this chapter I have not changed anything Another one : After removing from the print, I first remove the support, then clean the model in isopranol. Many people clean it first, and only then remove the support
Nice work, what epoxy are you using?
Thank you ! I understand that you are talking about resin? I use Anycubic (beige and gray)