Flexi SeaHorse (Archived)

Hey everyone! 🧡
The wait is over—our Flexi Sea Horse is finally ready and available to download from the June Designs Post! 🐴🌊

This one was such a blast to design and print! You’ll get two versions: the fun, classic toony style and a detailed version with added textures and a matching head for that extra flair.

🔹 Tip: For keychains, it's best to scale down to 80%, as the full-size version might be a bit too big. And don’t forget to use a brim when printing the smaller version to keep it stable!
--------------------------------------------------------------------------------------------------------------
The design is split into parts due to the seahorse’s unique proportions, so you’ll need to assemble it after printing. Don’t worry—it’s super easy! With a little twist and some gentle pressure, the pieces snap-fit together nicely.

🔹 Tip: I’ve added a small arrow on the middle joint to guide you—just align it with the upper body piece and snap in that direction for the perfect fit!

Hope you all enjoy this adorable sea buddy—can’t wait to hear what you think! 💬😊

---------------------- Link to Download Post---------------------------

Below are the recommended settings:

• No need for supports!

• Aim for a layer height between 0.16mm - 0.18mm

• Stick to 2 walls

• Bottom layers: 4

• Top layers: 6

• Shoot for a 15% infill (Gyroid)

• Downscale from 100% to 80%

• Precision settings: Slice gap closing radius - 0.004, Resolution - 0.004  (Highly recommended for multicolor Prints)

• Uncheck Arc Fitting
  
  
  Remember to flaunt your printed masterpieces on social media and tag me using the links below💖

  Facebook: Link
  Instagram: Link
  TikTok: Link
  
  Happy 3D Printing! 🛠️🎨🐾