Hi Everyone! I’m super excited to share the newest design – Flexi Little Bee! 🐝 No sneak peek this time 😁 – just a surprise drop! Availabl

Hi Everyone!
I’m super excited to share the newest design – Flexi Little Bee! 🐝
No sneak peek this time 😁 – just a surprise drop! Available to grab from May Designs Post!
It’s a fun print-in-place model with a magnetic base. Since it’s shaped like a hexagon, you can print multiple bases and create your own mini sticky note board – perfect for your office desk or fridge! 🧲✨
Just remember to snap the magnets in the right orientation so the bee magnets can connect properly with the base – you know… north pole, south pole stuff 🤭

If you're using a non-magnetic surface, a bit of double-sided tape at the back of the Base will do the trick – stick it anywhere you like!

I’ve also added a keychain version, so you can carry this cheerful little bee as a backpack buddy. 🎒💛
I hope you will love this design. Let me know what you think in the comments – I’d love to hear your thoughts! 🐝💬

------------Download-----------

Below are the recommended settings:

• No need for supports!

• Aim for a layer height between 0.16mm - 0.18mm

• Stick to 2 walls

• Bottom layers: 4

• Top layers: 6

• Shoot for a 15% infill (Gyroid)

• Downscale from 100% to 80%

• Precision settings: Slice gap closing radius - 0.004, Resolution - 0.004  (Highly recommended for multicolor Prints)

• Uncheck Arc Fitting
  
  
  Happy 3D Printing! 🛠️🎨🐾