Flexi Hedgehog (July Design)(Archived)

Hello everyone! Hope you're all doing awesome! I'm thrilled to announce that Flexi Hedgehog is now available for subscribers to download! I hope you will enjoy printing this design 😊

I've included two pre-painted versions: one with the painted tips on the quills which is for those who don't care about the print time 😎
 And another one without painted tips for those picky about print time and this should save you some layer-switching time. 🥰
So go ahead and pick your favorite! 😉

As for the keychains, I'd suggest printing them at 80% scale because, let's be honest, 100% is more like a pocket anchor than a keychain.
Please excuse the stringing on the quills 😅 I forgot to remove them before taking the photographs.

Below are the recommended settings:

• No need for supports!

• Aim for a layer height between 0.16mm to 0.18mm

• Stick to 2 walls

• Bottom layers: 4

• Top layers: 6

• Shoot for a 15% infill (Gyroid or Cross Hatch)

• Downscale from 100% to 80%

• Precision settings: Slice gap closing radius - 0.008, Resolution - 0.008 (This helps avoid weird artifacts near the eyeball while printing in multicolor)
  
  Remember to flaunt your printed masterpieces on social media and tag me using the links below.

  Facebook: Link
  Instagram: Link
  TikTok: Link
  
  KeyChain Used - https://amzn.in/d/00FHFXd0
  Magnets Used - https://amzn.in/d/070iju72
  
  
  Archived Design now available on MMF store
  
  
  -------------------------Link to MMF Store ----------------------------