(DEV) Meo's Drag Parts 3.1.34

** Mod file post: https://www.patreon.com/posts/dev-meos-drag-v3-121602720

!! IMPORTANT !!

To use the parachutes, you must link an input on the controls that can be found in the "Meo's Drag Parts" control tab.

The parachute can be found either on the rear bumpers where the previous versions of it were, but also on the tow hitch. This means that every mod that shares the tow hitch with a vanilla vehicle (most of the pick-up mods) has it as well. The parachute has some options in the tunning tab to reposition it and/or control its stopping power.

The file meosdragparts_mod inclue support for some modded vehicles (If you want me to add one, DM me)

there is a .txt file with a link to every supported mod in it

____________________________________

4-Link Guide

Guide:

In game vehicle debug settings:

Suspension setup tips:

(this is generally speaking, tuning may vary depending on the vehicle setup and power)

• Squat:

  • Lower Bump

  • Higher Rebound

• Separation

  • Higher Bump

  • Lower Rebound

  • Higher Spring Height with lower Spring Rate OR more Additional Extension Limit

____________________________________

Updates

Date format: (dd-mm-yyyy)

Update: (25-09-2026)

dragpartswheelsnitrous.zip (3.1.34)

• Fixed some swaybars being deformed easily (caused vehicles to not launch straight)

• Added 4-Link on:

  • Cherrier Ardente

  • Cherrier Vivace

  • Cherrier Tograc

• Added RWD drag configs on:

  • Cherrier Ardente

  • Cherrier Vivace

________________

Update: (25-09-2026)

dragpartswheelsnitrous.zip (3.1.33)

• Added 4-Link on the Bruckell Legran

• Update Bruckell Legran configs

_________________

Update: (18-09-2026)

dragpartswheelsnitrous.zip (3.1.32)

• Sorted custom configs in their proper categories

__________________

Update: (11-09-2026)

dragpartswheelsnitrous.zip (3.1.31)

• Added a new axle style: 12.5 inch

__________________

Update: (21-08-2026)

dragpartswheelsnitrous.zip (3.1.30)

• Added Debug options and a guide to tune the 4-link

________________

Update: (14-08-2026)

meosdragparts_mod.zip:

• Added cut hoods for Royal Renderings F82 mod

________________

Update: (31-07-2026)

dragpartswheelsnitrous.zip (3.1.28)

• Updated Cherrier Vivace config

• Bug fixes

________________

Update: (29-07-2026)

dragpartswheelsnitrous.zip (3.1.27)

• Added support for the Cherier Ardente

________________

Update: (24-07-2026)

dragpartswheelsnitrous.zip (3.1.26)

• Bug fix

• Grand Marshal 4-Link Improvement

• BX 4-Link Improvement

meosdragparts_mod.zip:

• Added Support for Royal Renderings F82 mod:

  https://www.patreon.com/SpoolingDieselDesigns/posts/2015-2020-f82-m4-164600972

  • 4-Link

  • Parachute

  • ETK engines

  • Transmission & Converters

________________

Update: (28-06-2026)

dragpartswheelsnitrous.zip (3.1.25)

• Increased the maximum stopping power of the parachutes

  • 135% -> 160% (in the Tuning menu)

• Bug fix

________________

Update (29-05-2026)

meosdragparts_mod.zip:

• Added Support for BeamNG Repository mods:

  • Gavril Vertex: https://www.beamng.com/resources/gavril-vertex-na2.13061/

  • Hirochi CCF: https://www.beamng.com/resources/2020-hirochi-ccf.29318/

  • Blackpool Superlite: https://www.beamng.com/resources/blackpool-superlite.10011/
    
    

_________________

Update: (04-04-2026)

dragpartswheelsnitrous.zip (3.1.24)

• Added "Meo's Variable locking converter", the 2.0 version my variable converter

  • Same as it first version, but with lockup settings and wider tune ranges and bug fixes

• Updated the ETK-800 config

• Bug fixes

meosdragparts_mods.zip

• Bug fixes

________________

Update: (21-03-2026)

dragpartswheelsnitrous.zip (3.1.23)

• Added parachutes to the MD-Series, Wigeon and Pigeon

• Added 4-link to the Pigeon

• Added a wide bed and bed bars to the Pigeon

• Added a config to the Pigeon

________________

Update: (20-02-2026)

dragpartswheelsnitrous.zip (3.1.22)

• Bug fixes

________________

Update: (13-02-2026)

dragpartswheelsnitrous.zip (3.1.21)

• Added 4-Link rear suspension to the ETK-800

• Added a new config to the ETK-800

• Added "Indestructible Engine Block" option to the Xtrem NO2 shot

___________________

Update (03-02-2026)

meosdragparts_mod.zip:

• Updated S650 Mustang from Royal Renderings:

  (https://www.patreon.com/posts/2025-mustang-v1-144831208)

  • Added a Drag Wing

    • Multiple finish options per section

  • Updated the drag config

__________________

Update (23-01-2026)

meosdragparts_mod.zip:

• Updated S650 Mustang from Royal Renderings:

  (https://www.patreon.com/posts/2025-mustang-v1-144831208)

  • Added cut rear diffusers

  • Added cut hoods for the 500 CUI and 454 LSX

  • Added variable torque converter

  • Added adjustable Drag transmission

  • Added a new 6 sec Drag config

• Added support for:

  • Precision Drag Mods (PDM):

    • Cateye

    • Promod GT500

    • 68 Promod Camaro

    • 6th Gen Camaro

  • OrlandoEdits:

    • Honda Civic EK9

    • Honda Civic EG V3

  • Smoke & Mirrors Racing:

    • Chevy S10

    • Corvette C7

__________________

Update: (11-01-2026)

dragpartswheelsnitrous.zip (3.1.20)

• BX rear 4-Link suspension stability fix

________

Update: (06-01-2026)

dragpartswheelsnitrous.zip (3.1.19)

• Added Parachute Release Kit (lever inside the vehicle)

• Bug fixes:

  • Some front wheels not working properly

  • Some suspensions not working properly

meosdragparts_mod.zip:

• Updated S650 Mustang from Royal Renderings:

  (https://www.patreon.com/posts/2025-mustang-v1-144831208)

  • Tweaked 4-Link Drag rear suspension

  • Added Preload setting on the rear swaybar

  • Added Parachute Release Kit

Update 3.1.18: (26-12-2025)

dragpartswheelsnitrous.zip (3.1.18)

• Added 4-Link rear suspension to the ETK-C

• Added a new config to the ETK-C

• Adjustable front hub weight on Front Welp Rancing Wheels (not as optimal as frame mounted ballasts, but this will be universal and compatible with other mods)

• Tweaked some 4-Link default geometry and range to allow better Separation

• Tweaked some Drag configs

• Added a new variable to rear drag springs: "Additional Extension Limit"

  • This allows the spring to work as before in compression, but can now have free play in extension. Can be useful for radial build with wheel separation

_____________

Update (18-12-2025)

meosdragparts_mod.zip:

• Updated S650 Mustang from Royal Renderings:

  (https://www.patreon.com/posts/2025-mustang-v1-144831208)

  • Added 4-Link Drag rear suspension

  • Added long travel front strut

  • Updated Drag config
    

_____________

Update 3.1.17: (10-12-2025)

dragpartswheelsnitrous.zip

• Added X-trem JATO to Hirochi HT-55

_____________

Update (05-12-2025)

meosdragparts_mod.zip

• Added a couple new supported Royal Renderings mods to the list:

  • F87 M2 : https://www.patreon.com/posts/f87-m2-update-v1-140328767

  • G80 M3: https://www.patreon.com/posts/g80-m3-download-133475055

  • G82-G83 M4: https://www.patreon.com/posts/m4-g82-g83-v1-6-124841590

  • Temerario: https://www.patreon.com/posts/temerario-v1-3-114264739

______________

Update (03-12-2025)

meosdragparts_mod.zip

• Added a couple new supported mods to the list

• One of them is the brand new S650 Mustang from Royal Renderings:
  https://www.patreon.com/posts/2025-mustang-v1-144831208

• With an ETK engine slot making it support every ETK engines:

______________

Update 3.1.16: (28-11-2025)

dragpartswheelsnitrous.zip

• Added support for the Ibishu Hopper

• Added shift point options to "Meo's Drag Transmission"

______________

Update 3.1.15: (18-10-2025)

dragpartswheelsnitrous.zip

• 15x16 Tires Bug fix

• Added 8-Lug Heavy Rear hub to the Bruckell Nine's 4-Link

______________

Update 3.1.14: (07-10-2025)

dragpartswheelsnitrous.zip

• Added Dually 15x10 rear wheels

  • 15x10 Alder Drag Welp Racing Rear Wheels (Dually)

  • *since true duallies are not compatible with regular lugs, these are coded as singular wide wheels

______________

Update 3.1.13: (07-10-2025)

dragpartswheelsnitrous.zip

• ETK-I Bug fix

______________

Update 3.1.12: (07-10-2025)

dragpartswheelsnitrous.zip

• Minor Bug fix

______________

Update 3.1.11: (18-07-2025)

dragpartswheelsnitrous.zip

• Added 'Pro Drag Rear Coilovers' to the bx that allow more tuning options with better separation tune support

• Minor Bug fix

______________

Update 3.1.10: (11-07-2025)

dragpartswheelsnitrous.zip

• Added 4-Link suspension to ETK-I

______________

Update 3.1.9: (20-06-2025)

dragpartswheelsnitrous.zip

• Updated the Burnside Special and the Miramar (0.36 refresh)

______________

Update 3.1.8: (13-06-2025)

dragpartswheelsnitrous.zip

• Added support to Gavril H-Series

• Added 4-Link suspension to Gavril H-Series

• Added a second axle style option to the 4-Link suspension (on all vehicles that have it)

______________

Update 3.1.7: (16-05-2025)

dragpartswheelsnitrous.zip

• Added 15x4 & 17x4 Alder Vulcan wheel options

• Added support for Civetta Bolide

______________

Update 3.1.6: (25-04-2025)

dragpartswheelsnitrous.zip

• Bug fixes

• Added Weight ballast option to the parachute rack

______________

Update 3.1.5: (16-04-2025)

dragpartswheelsnitrous.zip

• Added 4-Link Pro Drag axle to Sunburst

• Added Parachutes and Wheelie bars to both Ibishu Pessima

meosdragparts_mod.zip

• Added support for some of Boost After Dark (KZN) cars (complete list at the bottom)

______________

Update 3.1.4: (08-04-2025)

dragpartswheelsnitrous.zip

• Bug fix

• Improved parachute stability

• Added models for mod supports

meosdragparts_mod.zip

• Added support for all other HLP cars & dragsters

______________

Update 3.1.3: (05-04-2025)

dragpartswheelsnitrous.zip

• Bug fix

______________

Update 3.1.2: (03-04-2025)

dragpartswheelsnitrous.zip

• Support Sunburst 2.0

• Bug fix

Update 3.1.1: (30-03-2025)

• Both files have been updated

• Bug fix

• Added details (welds on the parachute mount)

• File size optimization

• Added support for Meo's Dragster

• Added support for Meo's FunnyCar

Functional Parachutes Update (v3.1):

• Added functional parachute option to the already in place parachutes bags 2.0

  https://youtube.com/shorts/q1EkqMCwT04

• Updated all parachute bags to the 2.0 version

• Added parachute rack on the towhitch of the majority of the vanilla vehicle

• Added a roof parachute for base jumping as a roof bar option

  • Every vehicle with roof bars has it

  • Only the UTV has a config already done

• Added the 4-Link 2.0 suspension to the Burnside

• Updated all Meo's Pro Drag configs

• Added drag configs on more vehicles

Update 3.0.2:

• Added more tuning options to the 4-Link drag rear suspension

• Added Parts to the Ibishu Miramar:

• 4-Link drag rear suspension (with the wheeliebar)

• New Parachute Bags v2.0

• Updated Ibishu Miramar config

_____________________________________

Update 3.0.1:

• Added Parts to the Bruckell Bastion:

  • 4-Link drag rear suspension (with the wheeliebar)

  • New Parachute Bags v2.0

• Updated Bruckell Bastion config

• Rally tires texture fixed

__________________________________________

3.0 initial release:

Pro Drag 4-Link Suspension:

• Realistic Wheeliebar slot

• Adjustable geometry (Anti-squat adjustment)

• Customizable color

• Custom Jbeam

• Fully modeled

• Only available on (so far):

  • Bruckell Moonhawk

  • Bruckell Nine

  • Garvil Barstow

  • Garvil Bluebuck

  • Garvil D-Series (and Garvil Roamer or any vehicle/mod based on the pickup)

  • Garvil Grand Marshal

  • Ibishu BX-Series

Adjustable wheeliebar (Only on the Pro Drag 4-Link above)

• New realistic wheeliebar attached to the rear axle

• Customizable Color

• Custom model

• Fully Adjustable in the tuning tab:

  • Length

  • Width

  • Angle

  • Stiffness

  • Left-Right Preload

New parachute bags

• New materials (textured)

• Acurate Jbeam (Rope and safety flag move)

• Not an extension of the bumper anymore

• Can still be found in the bumper slot, but is actually attached to the frame

• *Only available on (so far):

  • Bruckell Moonhawk

  • Bruckell Nine

  • Garvil Barstow

  • Garvil Bluebuck

  • Garvil D-Series

  • Garvil Grand Marshal

  • Ibishu BX-Series

FUNCTIONNAL PARACHUTES COMING SOON

Updated Welp wheels

• Added an option to enable/disable self collisions(usefull on some vehicle where to tire collision prevent the suspension to go lower like on the pickup)

• Changed slot positions for better readability and to be easier to use and customize

• Added 17x4 rear wheels

Updated Drag Tires (Front - Rear - All sizes)

• Removed "Pro Street" tires (the tires with the sport threaded texture)

• Renamed the tires to "Meo's Pro Drag ... tires"

• Added look options (10 different beamng vanilla texture)

  • Drag Slick

  • Drag Radial

  • Racing Slick

  • Radial T/A

  • Sport

  • Thin Whitewall

  • Thin Redwall

  • Vintage

  • Rally

  • All-Terrain

Otherwise, the rest is the same as in the previous version : https://www.patreon.com/posts/meos-drag-parts-34068206

MOD SUPPORT LIST:

Meo_3000_QC:

• https://www.patreon.com/posts/meos-dragster-0-52991031

• https://www.patreon.com/posts/funnycar-altered-67531150

Boost After Dark (KZN): https://www.patreon.com/boostafterdark

• https://www.patreon.com/posts/kzns-foxbody-124720965

• https://www.patreon.com/posts/kzns-67-camaro-116068701

• https://www.patreon.com/posts/kaizens-new-edge-109590171

• https://www.patreon.com/posts/kaizens-malibu-105277069

• https://www.patreon.com/posts/kaizens-ws6-am-93069634

• https://www.patreon.com/posts/kaizens-1970-ss-100462243

2FastRacing:

• https://2fast.racing/forums/resources/69-camaro-pro-mod-drag-car.37/

• https://2fast.racing/forums/resources/1967-camro-pro-street-drag-car.3/

• https://2fast.racing/forums/resources/chevrolet-copo-camaro.161/

• https://2fast.racing/forums/resources/toyota-starlet-drag-car-1981-revolution-racecraft-original.166/

• https://2fast.racing/forums/resources/mazda-rx-8-promod-13-b-rotary-revolution-racecraft-original.167/

• https://2fast.racing/forums/resources/dodge-charger-66-67.147/

• https://2fast.racing/forums/resources/2020-toyota-supra-mkv-rr-original.49/

• https://2fast.racing/forums/resources/1965-ford-mustang-gt-coupe.128/

• https://2fast.racing/forums/resources/montie-carlo-prostreet-drag-car.5/

• https://2fast.racing/forums/resources/chevrolet-corvette-c5-z06-revolution-racecraft-2fast-original.60/

• https://2fast.racing/forums/resources/1970-chevrolet-chevelle-revolution-racecraft-original-2fast-pro-mod-chassis.24/

ChiveSK/2CRZY Performance:

• 6th gen camaro

Half Lit Performance (HLP): https://www.patreon.com/HalfLitPerformance

• hlp4eye

• hlp64polara

• hlp65chev

• hlp67camaro

• hlp69camaro

• hlp70chev

• hlp71chev

• hlp72camaro

• hlp88monte

• hlpbilly

• hlpc6

• hlpdragster

• hlpdragster2

• hlplizzymusi

• hlpmistress

• hlptf

RyL Garage:

https://www.patreon.com/posts/2011-14-mustang-111241809

https://www.patreon.com/posts/1970-plymouth-98494517

LucasBE:

https://store.lucasbe.com/p/barstow-iv/

Frix:

https://www.patreon.com/posts/huracan-v3-85536502

Infinity Modding:

https://www.patreon.com/posts/ford-mustang-111963804

Precision Drag Mods (PDM):

https://www.patreon.com/posts/3rd-gen-camaro-1-117406052

Savior:

https://ko-fi.com/s/af95d4318c (s650 mustang)

https://ko-fi.com/s/a26d997c18 (corvette c8 z06)