💦 CREATE AND FUCK YOUR OWN AI CUMSLUT 🔥 TRY NOW ♥
Create AI Cumsluts 💦
July Part 2 - Preview (1 of 9)
July Part 2 - Preview (2 of 9)
July Part 2 - Preview (3 of 9)
July Part 2 - Preview (4 of 9)
July Part 2 - Preview (5 of 9)
July Part 2 - Preview (6 of 9)
July Part 2 - Preview (7 of 9)
July Part 2 - Preview (8 of 9)
July Part 2 - Preview (9 of 9)
July 21, 2020

July Part 2 - Preview

Hello everyone! Garin here.

I've got some good news, more good news and bad news as a result of the good news.


So, Good news: July Part 2 is going to be HUGE.  

We've got a Dark mech flier, A new feudal guard special character, the first in a line of Tempest lord command characters (which will be added to the welcome pack) and an absolutely MASSIVE upgrade set for the feudal guard. More than 110 new parts. and of course, EVERYTHING's pre-supported.

Now for the more good news part: Seb is wrapping up his last days at his current job and will be working on the Makers Cult Projects full time!

So the bad news. Unfortunately, these last couple days have been incredibly busy for Seb wrapping up, so we've had to delay the release of part 2. 

We are planning on having it out this weekend at the latest though. I am very sorry for the the delay.

We realize that the window of  the 25th to the 31st does not give a lot of time for download, so if you are a subscriber during  July, please be sure to send us a Private message and we will send you a download if you miss it.  We are also planning on adding July to our download site as soon as possible to give subscribers as much time as needed for the download.

On the bright side though, Starting next month Part 2 will be released far earlier and more reliably.  We're going to try to stick to consistent releases on the 4th and the 16th of each month.

Thanks for sticking with us folks.

-Garin

Comments (28)

M
Michael Scanlin · July 24, 2020

Love the models, will the rest of the welcome pack be getting supports any time soon?

T
The Makers Cult · July 25, 2020

Yes. As we move models over from google drive to the new site we will be pre-supporting them.

M
Marcelo Cacace · July 24, 2020

This upgrades can be used on the black knights?

T
The Makers Cult · July 24, 2020

The upgrades are primarily designed for the feudal guard range, with some scaling it may be possible to fit them on the black knights

L
Lewis Rush · July 24, 2020

can't wait to put those bolters on my squad sergeants

L
LordNikon · July 23, 2020

Can't wait to get my hands on that new flyer!

S
Sam Yool Log · July 22, 2020

Presupports are good but the raft has no lip on it. Very difficult to scrape some off the pieces off.

T
The Makers Cult · July 22, 2020

Hello, We have moved to lip-less files intentionally as the main cause of print failure on the discord seems to be lack of bed adhesion. A lipped file causes a great deal more stress on the FEP as after the initial layer the next few layers have more and more surface area causing much greater suction force than a vertical base. If this is a problem though, you can always an additional support in your slicer with a lip, and use that section of raft to pry off the part.

J
Joshua · July 22, 2020

Will next month's upgrade and body's for the fudal guard compliment or replace what's on CG trader ? I'm keen to print some of these guys but I'm also lazy so happy to wait for supported versions

T
The Makers Cult · July 22, 2020

Compliment and possibly replace (up to the user), aesthetics will slightly differ to the original infantry. From the upgrades you'll be able to make similar infantry to basic FG infantry

T
Tunamitch · July 22, 2020

Great work as usual... are there any plans for xenos? space orcs, bugs etc?

C
Craig McCutcheon · July 22, 2020

just signed up because of the pre-supports. Thanks for all the hard work guys!

T
Travis McGruder · July 21, 2020

God, what an incredible looking lineup, what an offering! This is stuff is gonna be amazing! Mad props to everyone who had a hand in 'em.

G
Greg · July 21, 2020

Can I also thank you again for the pre supports - they make SUCH a difference to ease of printing.

S
Sam Yool Log · July 21, 2020

So pumped for all of this! Just finishing up printing my thunder Warriors. I hope we get the Saturnite ones eventually.

J
Jan Mehrens · July 21, 2020

Is the Dark Mechanicus flyer getting a detailed cockpit?

T
The Makers Cult · July 21, 2020

Yes ! And getting a good result using clear resin is one of the main challenges. Cheers, Seb

h
helloyesthisisdog · July 21, 2020

Damn I love those feudal guard upgrades. Gonna take a little trip to your cgtrader page to get something to put them on.

T
The Makers Cult · July 21, 2020

Do bare in mind next month we will have another upgrade pack with various body options :)

e
eachtoxicwolf · July 21, 2020

Life happens. Hope stuff clears up relatively well

Q
Quest Miniatures · July 21, 2020

Pre supports are hot!!!

D
De · July 21, 2020

Sticking no no no... In these hard times your monthly patreon has never even come close to do i really need their models this month. the amount of planing that happened the last time you talked about discount code please, you guys will never get ride of some of us....keep up the great work...

G
Giorgio Marino · July 21, 2020

Awesome works as always, and don't worry for the delays.

G
Guy Grundell · July 21, 2020

Love all your work guys!

U
Ultramarcos · July 21, 2020

Good Job guys....from my end, no need to rush anything. make sure you transition properly and take the time you need!

J
James March · July 21, 2020

Great news on the job seb. Loving all the files you guys are putting out. Thanks

T
Tazdevilal · July 21, 2020

Holy Emperors Ballz that’s a lot of options there.

E
Ellis P Willson Jr · July 21, 2020

Love the look of it all