💦 CREATE AND FUCK YOUR OWN AI CUMSLUT 🔥 TRY NOW ♥
Create AI Cumsluts 💦
June 20, 2026

June release: Pride pronoun and identity charms

Happy Pride Month!

For our second drop for this month we wanted to make a small, wearable set of pronoun and identity charms that can be used as earrings, keychains, zipper pulls, or bag charms!

There are two styles included:

Raised text version
This version has raised lettering, so it can be printed with a simple single filament swap or printed in one colour and hand painted afterward.

Flush double sided version
This version has a clean, flat surface and is designed for double sided multi colour printing.

What is included

You receive the following charm files:

  • ALLY.stl

  • BI.stl

  • ENBY.stl

  • GAY.stl

  • HE.stl

  • HER.stl

  • HIM.stl

  • LESBIAN.stl

  • QUEER.stl

  • SHE.stl

  • THEM.stl

  • THEY.stl

  • TRANS.stl

You also receive multi colour project files:

  • Double_sided_Pronouns_charms_multicolour_BambuStudio_project.3mf

  • Double_sided_Pronouns_charms_multicolour_generic_project.3mf

  • Raised_Pronouns_charms_multicolour_BambuStudio_project.3mf

  • Raised_Pronouns_charms_multicolour_generic_project.3mf

Files for this month are provided to active Drake and Ancient Dragon patrons through Google Drive during the release month. Once the models are available on MyMiniFactory, you will receive a reward link so you can add them to your MyMiniFactory library.

Google drive link for this month's release:

https://drive.google.com/drive/folders/1G3RdHxkh9kEYYZuq-7a38mQTA6sDnASC?usp=sharing

Printing notes

Printer type: FDM

Material: PLA

Nozzle size: 0.4 mm

Layer height: around 0.2 mm

Infill: 15 to 25 percent gyroid (or your preferred pattern)

Supports: none required

Wall-Type: Arachne or thin-wall printing modes are recommended

Raised text version

  • Print in one colour and paint the raised text afterward, or

  • Add a filament swap before the lettering begins for a simple two colour effect

Flush double sided version

  • Designed for multi colour printing

  • Works well with AMS or other multi material systems

  • Use the included .3MF project files for pre assigned colour regions

  • This version gives the cleanest finished look if you want the charm readable from both sides

Tier access and usage

Drake tier: Receives the Pride pronoun and identity charm set for personal use as a June bonus release.

Ancient Dragon tier: Receives the same files plus the right to sell physical prints under the merchant license terms in our Patreon introduction post.

STL resale or sharing is not permitted. Credit to Curations By Kira is required when selling physical prints, and merchants must have an active Ancient Dragon subscription.

Happy Pride, happy printing, and thank you for supporting Curations By Kira.