New 'Clicker' Line Live!!
We are happy to announce that we will now be adding Clickers every month to our Print and Play Flexi Tier!
This is an addition to the tier, Flexis aren’t going anywhere! You’ll still receive a brand new Flexi release every month, along with a growing collection of Clickers.
For our very first Clicker release, we’ve created 14 Mario inspired Clickers, each including:
✅ Pre-colored 3MF files
✅ Keychain variations
✅ Print-ready designs
We’re excited to bring even more fun and value to the Print and Play Flexi Tier, and we hope you enjoy this first collection! We hope you like them!
Comments (53)
I joined earlier this month. How do I download these clickers?
are the store prices what they are or is there a discount to purchase past collections. thanks
i have just subscribed for Cliker tier, how can I download Mario clicker set ?
hello the new light saber clickers are not fitting is there a youtube video on how to make them fit and work thanks
NEW LIGHT SABER CLICKERS DO NOT FIT is there a way you can fix
I down loaded them to my husbands drop box and it’s saying he does not have acsess to them how can I get the files to be able to print them please
Email contact@nostalgic3d.com with photos of your membership and we'll get you sorted
Hi there, is there a way to strengthen where the clicker interfaces with the keyswitch? The little cross piece seems to break on a lot of the ones we've printed. There's only one layer it connects to (the way it's sliced in PS). *Edit to be more clear* The stem that slides over the keyswitch stem is very fragile on a few of these. Boo is a good example. It's only 1-2 walls and easily snaps off either when removing supports or if it's clicked too "aggressively".
Having issues with the bottom of the yoshi clicker. There’s a small square underneath yoshi which I guess is where supports are put, how do you remove that square?
Hi ken , hope you are well.Are you talking about removing the supports ? A screwdriver ,side cutters or butter knife would do.
the yoshi one is not on the bundle it says renders on first file but nothing in it
what layer height do we print the tube and the characters ,wall count , infill % using snapmaker u1
It s a personal preference really i normally do .2 3 walls and 15 % Infill on all my prints across all my machines. However other team members have their preference
Love these things, can anyone confirm if the pipe tubes require supports? Having trouble with them.
Yes they do. Top z distance at .24mm (if youre printing at .2mm) and theyll come right off.
Warum kann ich die Juni Download nicht Herunterladen? Finde keinen Download link.
All downloads are in the pinned post https://www.patreon.com/Nostalgic3DModels/posts/download-here-159784379?utm_medium=clipboard_copy&utm_source=copyLink&utm_campaign=postshare_fan&utm_content=web_share
These look amazing - I can't wait to get these printed and ready for sale! Thank you!!!
Glad to hear it and thank you for the support!
What are the best clickers to buy to get a nice loud click? I bought a pack of 100 on Amazon and all of them are those of the more quiet click but they sent three out of the hundred that are nice and loud and a different colors almost like a sample pack. Any recommendations? Thanks in advance!
Hey there. Love the designs. I'm having issues with the pirahna plant and the Thwomp. I've tried the pawpular clickers and the ones that you recommended. The + shape doesn't seem to fit the clicker
Could you shoot us a dm on Facebook or email contact@nostalgic3d.com? Id like to get some pictures to help you out
Do you think you will be continuing to make improvements to your clicker designs? Unfortunately these don't work very well with the PawpularPrints key switches, which is what I exclusively use. It is very difficult to push the tops down onto the key switches, and he bases have to be glued in or they come out quite easily. Usually I only have to use a little bit of glue on the caps of most designs, as the clickers click into he bases very securely. These almost seem a bit to shallow so they don't stay in nearly as well.
Being the first round were always making improvements. However I've never personally used the pawpular prints clickers however I'd be down to order some and make adjustment accordingly
Are all the clicker bases the same, or do I have to print the base from each profile to fit that profile?
Which ones ?
On the Bowser shell, I haven't been able to get the plus side of the clicker into the shell. For those that haven't had any issues, what wall and fill settings are you using? Any other recommendations?
same
Are there colors listed for these? I see most colors when open in Bambu Studio but filament for the skin of the characters is not listed
We use numakers blushing ember for the skin tone.
anyone have issues with the yoshi clickers. The clicker dont seem to stick in the slot very well.
Depending on what material or printer you're using there may be slight variation. We always recommend using a dab of glue on the bottom to secure them
If I scale the clickers down would it scale down the square where I add the blue clicker? I’m worried that if I do that I won’t be able to fit it in. Is there a way I can make the clickers smaller while still fitting the blue clickers in it? The clickers are great and look great but they are just a bit too big for me.
Everything is scaled for normal clickers. If you scale down it scales the size of the clickers down as well.
What support settings should be used for the Bob omb top? I cannot remove them, so will have to toss all the ones I made and remake them. :/
What machine are you using ?
Where can we find the print instructions for the clickers to where we can see what needs support and what doesn’t
The 3mf files include all the settings. If your doing your own supports you should always check your slicer preview to make sure supports are where they need to be 🙂
This is AMAZING news!! Thank you soo much!!😊😍
What clickers do y’all buy ?
We used these 20pcs Blue Keyboard Switches,... https://www.amazon.co.uk/dp/B0F4X8SY1Q?ref=ppx_pop_mob_ap_share
I joined on May 31 late at night, and I didn't get a chance to download the 2-for-1 special. Did I miss out on this deal?
Hi Roger could you please direct message us so we can check account details please , thank you 😊
Apaixonada
Thank you for the pure styles!!!!
Incredible!!
These look amazing like all your work
Thank you , we were hoping members would love them !
Love the clickers. You kind of came up with something that i've been thinking of but with Pokémon in pokeball
These are awesome!!!
So excited for this! Thank you!
Excellent idea!
Love this so much. Great work