🐶✨ DOG CLICKERS VOL. 2 ARE HERE!
You asked for more dog breeds... so here they are! 😂❤️
Meet the next 3 pups in the Dog Clicker series:
🐾 French Bulldog
🐾 Australian Shepherd
🐾 Husky
Each dog comes in two versions:
🧺 Desk Clicker - in a little basket on a soft cushion
🔑 Keychain Clicker - with an extra little dog bone charm! 🦴
You can also add your own ball-chain keyrings if you want!
As always, you’ll get:
STL files
Pre-colored 3MF files
3MF files also prepared for Snapmaker U1 💙
⚠️ Please note: some print profiles use the Adaptive Layers - Smooth option. It gives the models a much nicer and smoother finish, but it can significantly increase the printing time. Check info about supports :)
You can of course turn this option off and use your own preferred print settings. :)
And yes... I already have more dog breeds on my list! (and cats :)) 😂🐕❤️
Which one should be next? 👀
Leave your suggestions below!
Comments (59)
como obtengo stl?
Sorry if I missed but is there a link for the clicker used
I haven't recommended any specific switches, but I personally use RK Blue switches. Any standard MX-compatible mechanical keyboard switches should work as well.
A Chihuahua would be fun too♥️
Definitivamente tendrías que hacer Dachshund
American Bully!
I am so excited for these dogs - they are so cute! How did you get the black on the Frenchie using a U1? That's a 5th color.
The 4-color plate uses dark brown instead of black. The 5-color version was printed on a Bambu Lab printer.
These are adorable!! Do you have a bernese mountain dog?
Thank you so much! It's on my list, but I haven't made the model yet!
Adorable 😻
Thank you !
is this available for printing if i join sub ?
yes
Maltese
All beautiful. I'd love a jack russell :) thank you
Thank you!
Hi jay, i paid for your patreon but I can't access anything.
Hi. The links for the models are in the current models post: https://www.patreon.com/Printyjay/posts/current-models-156357270/
I’d absolutely love to see your next project featuring a cat. Your style would be perfect for bringing a cute little feline character to life! 🐱✨ I’m sure it would be another amazing creation.
Cats will definitely be coming! 😄 Thank you so much for the kind words!
on ur next set....can you put on the pillows and baskets and engraved of who they belong to? like the "G" you did for Gecko? i print up all the "pillows" and baskets at the same time so they all have 1 set of the same color. but then its hard to figure out whose is whose. like the German Shepard and the husky.....verrrry similar
Thanks for the feedback! 😊 I think I’ll do that.
I printed the Australian Shepherd, and it turned out beautiful, but its mouth stays open when I leave it on the table. How can I make it open only when I press the clicker?
dm
Could you tell me what colors you used for the aussie please?
https://drive.google.com/file/d/1mPWeHVAiVjtZB6tb2Hvegl2iraHWKvsk/view?usp=drive_link
Hello, I joined last week and I still do not have access to the dogs and lizards. It does not show I have a membership. Could you check and see if it went through on your end. If not I can rejoin. I would like to print these for my 3rd graders :} Thank you. Michelle
CORGI!!!! =)
please, do not leave this collection, an make more and more of them =)
There will be more!
Corgie!
What clickers do you recommend for these?
I use these RK Blue switches: https://kbcustom.pl/produkt/rk-blue-switch-hurt-bulk/ Other MX-standard switches should work too. 😊 Just pay attention to the shape of the stem on top - the part where the printed piece goes. The switches I use have a simple cross-shaped stem. Some switches have a square shape around the cross, and those may not fit correctly. For these models, you need the version with just the cross on top.
Defs need a Jack Russel for suree :)
Hello
I want one
It’s available for paid Patreon members 😊
How to purchase
It's available for paid members right now. It will be available for purchase next month. 😊
It's super cute!! Could you please make a poodle one as well?
I joined on MMF rather than here, but follow here. Is there any way to link the memberships (I've been able to the other way around - From Patreon to MMF, but haven't figured out MMF to Patreon. I still see the Patreon posts, but it's limited.
YEAH! Great additions!! More suggestions: English bulldog, chihuahua, labradoodle
Hello
Very nice. I keep seeing ppl asking for various races. From a business perspective - I would say a sausage dog (dachshund) would definately be required. Maybe a Saint Bernard.
Thank you for your opinion! 😊 There are so many ideas. I’ll definitely go through all the suggestions and choose something from them. Thank you!
Golden doodle....and shiba inu! plz
Chihuahua, miniature schnauzer and maltipoo please, it will be sooo popular in Europe 😌
Shiba Inu!!
These turned out so cute! Love the variety in the first two batches. Would love to see a Dachshund, Corgi, and Poodle next. A Great Dane would be a great addition too!
RAT TERRIER. No one ever makes rat terrier stuff. I want to be able to make something that looks like my fur kid
Hello 👋
Shih Tzu please
Pug please!!!
Love them! It would be very cool to have these as stand alone flexi figures as well🐕
YES!!
Goldendoodle please!
Awesome 😍 A pomeranian would be so cool!
Ooh, I'd LOVE a Pom!