New Tiny Terras - Rough Green Snake (FREE snake for everyone!) + Full Terrarium on Patron 🐍🌿
The Rough Green Snake has joined the Tiny Terras family 💚🐍
👉 The Rough Green Snake model is FREE for everyone,
while the full terrarium set is available for my Patrons 💙
No supports needed - just make sure to read the attached PDF instructions carefully.
As always, the set includes fun facts, and this time labels are available in 9 languages!
(My dear Patrons - if you’d like labels in your own language, just let me know and I’ll happily prepare them for you 💬)
Terrarium versions
There are two terrarium sizes available:
1 - for larger printers
2 - for smaller printers like the A1 Mini
The terrarium lid comes in two versions:
with an optional slot for one LED in the top section
without LEDs
The terrarium is inspired by a calm, forest-style environment with branches, climbing elements and resting spots - a perfect cozy setup for a tiny rough green snake 🌿🐍
Doors & details
front doors:
version with “fake glass” or without
⚠️ Important notes:
This product is licensed for personal use only
A commercial license is required to sell printed models
Please read the instructions carefully before printing 🙂
💡 LEDs
The LED I used is linked here:
https://eu.store.bambulab.com/pl/products/mini-waterproof-rgb-led-tea-lights-with-remote-control?id=53613658931548
You can, of course, use other LEDs as well 🙂
Comments (30)
i printed this and love it but the tree goes all the way to the top of the terrarium leaving no space. I used the A1 file it will not let me upload a photo to show you. I love your stuff and I look forward to printing them all
What size magnet goes in the door to keep it closed?
plz check the pdf instructions - there is all info about magnets :)
Anyone know the dimensions of the glass pc that needs inserted in inches for example 5x7 etc
Rough Green Snake (for large printers) Front: 145 mm width x 207 mm height (5.71" x 8.15") Side panels (2x): 135 mm width x 238 mm height (5.31" x 9.37") A1mini: Front: 145 mm width x 150 mm height (5.71" x 5.91") Side panels (2x): 135 mm width x 178 mm height (5.31" x 7.01")
So after putting snake in egg, is it easy to crack open? just trying to see how to sell them. thank you!
You just need to squeeze it a bit and the egg will crack open. This egg is a different type than the Crackasaurs - it’s not meant to be broken with a hammer. It does require a little pressure, so you gently crush it to take the snake out. For best results, the egg should be printed with a specific setting - the wall thickness should be 1 wall (single wall).
So I'm slightly confused. I paid for the $10 a month subscription for patreon but it won't let me get this model without paying. Although I pay the $10 a month, do I still have to purchase the snake and terrarium?
The all models available in subscription are available in the current models post: https://www.patreon.com/posts/138860882 In the subscription, you get access to the models from the current month. If there aren’t any new releases yet in that month, you will always have access to at least the last 3 projects. I keep it this way to make it fair for members who have been supporting me for a long time. Older models are available in the shop, and active subscribers can purchase them with a discount. The discount code and all details are included in the “Current Models” post as well.
I will look again. Thank you for getting back to me
I found the larger snake but not the one that fits inside the egg. Can someone tell me where to find it?
There is stl file for baby snake and also included in slicer file
I'm making this right now as well. I love this design
These are incredible
Why is there a pause command for the eggs ?
to put the baby snake inside
I don't see a template for the glass in the A1. Can we use the one from the other file?
Check pdf there is info why there is no template and all needed info about "glass" size :)
Love this design!! I know many of the terrariums are the same size. Do you have a list of which critters go with which terrariums? I like to batch print and it would be helpful to know the frame sizes that fit each one.
This size is same as chameleon ;) soo you can use LED lid also for it
Wonderful!!
Do you have a link for the clear that you use for the side walls?
I don’t have a specific link, unfortunately - I bought it locally in a stationary store. It’s basically binding covers, around 200 or 300 microns thick (. The exact brand doesn’t really matter, they’re quite forgiving and easy to work with. example: https://www.amazon.com/Albyco-Sheets-Binding-Transparent-Protective/dp/B09PNHDQ4R?sr=8-5
My favorite so far, on the printers now. Thank you
This is awesome! Great job...again!
SO excited that there are BABIES that can hatch! Thanks SO much
Love this, going on the printer now
Best one yet! Love it.
This is awesome!
Can't wait to print