Better Together – Horse Frenzy Pack 🦄🪽💖✨ (Pony, Unicorn, Pegasus)
Hi dear community!! ☀️
We’re kicking things off with the release of “Better Together – Horse Frenzy”!
Inside the pack you’ll find pony, unicorn, and pegasus 🐴🦄🪽
Not only are they compatible with each other, but they also work seamlessly with all the other animals from the Better Together series (dog, cat, bunny, chick, bear, panda, and more!). 💖
What's included in the 3mf file?❤️
All models are ready for up to 4-color printers (filament change during printing needed)
Color tip: swap the heart filament (red) with the eye filament (white) halfway through the print and you will get a 5-color design with a 4-color printer!
If you want to simplify the design, you can delete the cheeks from your slicer
Magnets 🧲 (optional but recommended)
Each couple is made of two interchangeable halves, designed to be swapped, combined, and -most importantly- pulled together by magnets 🧲✨Magnets are optional… but highly recommended for the full wow effect 💖
Inside the 3MF files you’ll find pre-made magnet slots (we used round D8×2 mm magnets).
Using a different magnet size? No problem! Resize the slots directly in your slicer (we recommend +0.5 mm tolerance compared to the magnet size) 👇
Keychain 🔑 (optional)
Available with or without the keychain hole
We used 2.4 mm ringball keychains, easy to find and very common
Also compatible with standard classic keyrings (≈8 mm diameter)
Want to see more animals in Better Together?
Tell us in the comments or in the Chat (Patreon and/or Discord) which ones you’d love to see next 👇 Raccoons 🦝, foxes 🦊, ducks 🦆… or something totally unexpected?
Let your imagination run wild! ✨💭
General recommendations ⚠️
Before diving into the multi-color print, we highly recommend starting with a single-color test print to ensure everything works as expected (magnets size, ..)
For multi-color prints like this, we suggest filling the bed to minimize PLA waste from color changes.
Thank you for your incredible support! 💖
Happy printing!
Valeria & Mattia
Comments (22)
There was so much to pick that I didn't pay attention, and now the window has closed. Am I too late? :(
I checked my downloads folder and found that I had already saved it. I understand that the policy of making files unavailable after a certain period is intended for long-term subscribers, but it is a bit inconvenient.
Oh! If there's any chance, dragons would be suuuuper cute to go with the unicorns and pegasi.
🐲 why not!!
I love this better together range but I always mess the magnets up - what's a fool proof way of doing it to make sure the magnets connect
https://makerworld.com/en/models/663160-magnet-pen?from=search#profileId-1852326 :))
I printed the unicorn but there is no magnet hole, i used the bambu stl?
Hi! 😊 The magnet holes are included in the 3MF file. If you used the STL, that’s why you don’t see them. Try opening the 3MF and you should find the magnet option there!
Highland, raccoon and dragons!!! <3
Hello! Just want to say we love all your work! This will be my first time trying to print the Better Together collection. Is there an automatic pause for the machine to insert the magnet?
i! 😊 Thank you so much, really glad you like our work!! Yes, the pause is already set directly in the 3MF file 👍 So your printer will automatically stop at the right moment to insert the magnet. Happy printing!
Hello! Just want to say we love all your work! This will be my first time trying to print the Better Together collection. Is there an automatic pause for the machine to insert the magnet?
i! 😊 Thank you so much, really glad you like our work!! Yes, the pause is already set directly in the 3MF file 👍 So your printer will automatically stop at the right moment to insert the magnet. Happy printing!
Question. I got the size magnets you recommended but they rattle around inside... Should two magnets be used? Or are the supposed to rattle like they do? I don't like it personally so will have to figure out a way to fix it
Hi 😊 You should use one magnet per hole. If it feels loose or rattles, just add a tiny drop of glue and it will stay perfectly in place!
These look great!! Thank you for sharing 😀
Cows next please! Dairy, Highland, and Longhorn
They look so cute! Can't wait to get them going after work today. 💕 Given you have all the pieces, any chance of doing a unicorn with wings/pegasus with horn?
Yeah I hear you, four colors is becoming more normalized with 3D printers but with the head changing snapmaker now can print up to 16 colors with only a four color spool set. It's in a slicer software. Blending colors together. Technology moves
But why buy a new printer . ? Only for this ? Nahh dude never
OMG isn't this the cutest ever. My two daughters are going to love this.
Yay a new model.but not for people with one AMS. Only one file we can print with 4 colors . The other looks with less colors terible . So you must print with more then 4 colors