New! ❤️✨ Macaron Heart Clicker!
Hi Everyone, & happy start to the week. Today we're tempting you with something sweet, these heart-shaped macaron clickers!✨
Check the Video on Youtube! ✨
Download on Patreon, Premium 🚀
Printing recommendations ✨
We printed at 0.12mm for better quality, 0.20mm is also fine.
Secure the clicker with a drop of glue, to withstand day-to-day use.
We used PLA Pastel colors, any other PLA Matte is definitely suitable. Thanks to Spectrum for sending us the 5PACK - Pastello PLA, 5x 0.25 kg.
Not 3D Printed Parts 🛠️
The "clicky" component is created using a small, affordable part found in mechanical PC keyboards. Simply search for “Clicky Mechanical Switches” on Amazon o similar shop.
While you wait to get a "real" clicker, you can also 3D print a "dummy" one.
Can I sell physical copies of this model? 💰
Yes, if you have a commercial license! Check out our subscription plans on Patreon/Thangs for more details and unlock the opportunity to share this design with your customers.
We believe in true love, especially when it's 3d printed ❤️✨
Cheers!
Valeria & Mattia
Comments (14)
Is there any alternative pastel filament besides Filament Spectrum 5PACK Pastello PLA 1.75mm? Thank you !
Hi Mark! Generic PLA MATTE works well for this type of design. Spectrum was our first "pastel" filament that we tried 😊
These are so cute! What are the best support settings for the top and bottom piece? Thank you.
hi, manual standard supports :) i sent you a screenshot on your gmail!
What are the chances you will make a bakery box to put the macaroons in?
hi Olivier, that's a great idea, we'll talk about it tonight in our daily meeting and let's try to .. find the time to design it 😃
So the lower tier cannot download this?
Hi Jason, that's right, it's included for Premium. Or you can buy it with 50% off on Cults3D (the code should have arrived when you signed up - in any case I'll send it back to you via private message on Patreon). Best!
I'm having trouble printing these as well as the regular macarons. For the 2 heart parts (not the white middle part), if I print "open" side down on the print bed I believe I need supports, and the supports are really hard to remove and affect the fit of the clicker and white middle part. If I print with the "open" side up, then there's very little contact surface on the bed and it detaches. If I use a brim or supports, it's really hard to remove and leaves bad scars on the print. I watched the video but didn't see the orientation of the print... Any help?
hi, i reply on the Group Chat❤️ best
So cute!!!
🍪❤️✨ thank you!
So good 😍
thank youuuu❤️