HOLLOW VERSION of the Lamp Post now available in THE TRAM & STATION model.
. Hello everyone 🙂 I’ve included an optional version of the lamp posts, so you can add an LED light to the 3D printed version! The lamp post is split into two parts: the bottom and the top. IMPORTANT: If you choose to use this version, please remember to use the Tram Stop base for Lemax street lamps. This base will help you route the wires inside the base. Just a heads-up, this is just an extra option and doesn’t replace the existing lamp post files. To include this extra lamp post option, I’ve updated or created the following files: Project files: HOLLOW LAMP POST Option - Bambu Lab Project -v01 HOLLOW LAMP POST Snapmaker ORCA project file -v01 HOLLOW LAMP POST Prusa Project File -v01 Pdf files: THE TRAM STOP Colour Change Parts & Info -v02 Stl Files added: HOLLOW LAMP POST Bottom -v01 HOLLOW LAMP POST Top -v01 Happy Printing! Fulv 🙂
Comments (1)
Anyone Have part numbers or Amazon links for the lights used? I have a bunch of 5V mini LED's with wire leads, but they are at least 24 gauge wires and will not fit in this hole, plus there is at least 10 mm or more of solder, resistor, and shrink tubing under the bulb that is even thicker. That would need to recess down into the hole. Thanks.